Best Practices for Preparing a Bending Machine
Table of Contents
1. Overview – Why is Bending Machine Preparation Important?
2. Bending Machine Preparation Steps – Detailed Operating Guide
3. Video Demonstration – Visual Learning for Proper Operation
Overview
For first-time operators of the JUGAO Hydraulic Bending Machine, correctly starting and setting up the machine can be challenging. Improper setup may lead to reduced bending accuracy, mold damage, or even affect the equipment’s lifespan.
This guide provides a detailed breakdown of the key steps in preparing the bending machine, ensuring precise bends every time while improving production efficiency and processing quality.
Bending Machine Preparation Steps
Follow this procedure to ensure proper startup and stable operation:
1. Fill with Hydraulic Oil
Use No. 46 anti-wear hydraulic oil, maintaining the oil level at the midpoint of the gauge.
2. Power Connection
Ensure stable power supply (3-phase 380V ±10%) with proper grounding.
3. Install Foot Pedal Switch
Connect the foot control cable and test the emergency stop function for responsiveness.
4. Start the Hydraulic Pump
Release the emergency stop button, briefly start the pump, and observe if the pressure gauge reads normally.
5. Check Motor Rotation Direction
Start the main motor briefly and confirm the fan rotates clockwise (reverse rotation requires adjusting the power phase sequence).
6. Formal Operation
After confirmation, power on and conduct a no-load test to ensure smooth operation of all components.
Video Demonstration
By following these steps, you can ensure the bending machine operates at peak performance, minimizing errors and maximizing efficiency. For further optimization, regular machine calibration and mold wear inspection are recommended.
