
- Overview
- Inquiry
- Related Products

CONTROLLER
Customize The Controller For Your Press Brake
E300 Controller
E300 is a special numerical control device for torsion-axis bending machine. it’s widely used in NC press brake, high effective and easy operation.E300 CNC device adopts integral product structure, built-in high-performance A8 processor, and is equipped with 5.6-inch, 640x480 dot matrix, 18-bit full-color display screen, and integrates I/O port, serial port and USB interface.The product operation of E300 is mainly realized through the buttons on the front panel. At the same time, in order to meet the needs of users, an oil pump switch and an emergency stop button are installed in the customized suspension cabinet.
Press Brake Machine Frame Structure
1.Machine frame is of steel welding structure through finite element analysis and optimal design, featuring hi-rigidity and strength.
2.Welding stress is deleted after the annealing treatment for welding parts in the electric furnace, which can avoid the frame deformation in future. Sandblasting remove the rust on the welding parts and the anti-rust painting apply to the welding structure parts.
3.Heat Treatment Processes:JUGAO press brake and laser cutting machine steel frames undergo annealing at over 600⁰ to relieve stress and they are built to last years of heavy use without distortion.
Mechanical compensation workbench (V axis)
Mechanical deflection compensation with high CNC precision is adopted. Since there are many compensation points, the bending machine can realize linear compensation when bending the workpiece during operation, which can improve the bending effect of the workpiece. It has the characteristics of maintenance-free and more accurate compensation.
Press Brake 2-Axis CNC BackGauge With X, R-Axis
Ball screws and linear guide on X, R-axis
Axis X speed 500 mm/s.
Manual Z1, Z2-axis with HIWIN linear guide.
Mechanical accuracy ± 0.03 mm.
Fingers with double stop and micrometric adjustment.
One-key Release Fast Clamp
The one-key release fast clamp could ensure the safe and fast punch changing, with strict quality requirements and procurement standards of raw materials, which keeps the punch from falling out.
Made of high-quality tool steel/high-strength CrMo alloy steel, the maximum load capacity can reach 800 tons/meter, and the hardness after heat treatment can reach 56~60HRC.
Multifunctional Pedal Switch
JUGAO has upgraded the pedal switch to a new generation, with a single switch design, front-mounted rollers, emergency stop switch, and return button, all for easier and smarter operation.
The multi-function foot switch of the bending machine is an important control device, which allows the operator to achieve precise control of the machine through pedaling movements when operating the bending machine. The design of this switch not only improves the convenience of operation, but also enhances the safety of operation to a great extent.
Safety Light Curtain
The light curtain, JUGAO chooses is from the well-known brands, with perfect performance to offer a highly effective solution for both operator safety and machine productivity.
Using laser light source, it can detect objects as small as 5mm and allow vibration deviation,Once an obstruction enters the protected area, the machine stops immediately, protecting the personal safety of bending operators and avoiding accidents.